EDMONTON, ALBERTA: (780) 456-4498 / TOLL-FREE: 1 (866) 456-4498

Menu
Search
Filters
Close
Menu

2007

View as Grid List
Sort by
Display per page
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Picture of The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured usin

400-03461
$0.00
The 4L60/4L65E transmission spans many years and applications throughout the GM line-up. A 4 speed transmission designed for longitudinal mounted engines made it perfect for two wheel drive and 4x4 applications making it versatile for use in many car and trucks. It was the successor to the TH700R4 and was eventually replaced by the 6L80 transmission. Each NAPC transmission is remanufactured using an extensive build process which includes tearing down the unit to the case, thoroughly cleaning with high pressure washers and inspection before proceeding. After a thorough inspection the unit is assembled with an overhaul kit with all new gaskets, seals, rings, bearings, frictions, steels and a filter. All hard parts are either requalified, machined to specific tolerances or replaced with OE or better components. The valve body is built with new solenoids and dyno tested on NAPC’s valve body dyno before being installed into the unit. Then the transmission is fitted with a remanufactured torque converter and dyno tested as one to simulate real world conditions to check pressures, input/output speeds and fluid flow before it is shipped out. All Units include the torque converter, a 3 year/160 000KM non-commercial warranty and return shipping is included in your shipping price. On top of NAPC’s standard build process, this unit also receives these updates and enhancements to improve the longevity and durability of the transmission: -Viton Servo D-Ring Seals -Oversized Pressure Regulator Valve, Boost Valve and Actuator Feed Limit Valve -Updated TCC Apply Valve and Servo Release Check Valve - Pin less Accumulator Pistons and improved springs - Separator Plate modifications to improve 3-4 shift -Wide Sun Gear Bushing -New Pump Rotors and Vanes
+ -
Close
Filter by Clear All
Make Clear
Model Clear
Liter Clear
Cylinders Clear
TransmissionNumSpeeds Clear
RRTime Clear
TransType Clear
TransmissionMfrCode Clear
DriveType Clear
Qualifiers Clear
AltOEMNumber Clear
TagID Clear
AltTagID Clear
PartNumber Clear
AppNumber Clear
FuelTypeName Clear
YearID Clear
TransmissionControlTypeName Clear
Filter by
Filter by attributes
  • AltOEMNumber
  • AltTagID
  • AppNumber
  • Cylinders
  • DriveType
  • Liter
  • Make
  • Model
  • PartNumber
  • Qualifiers
  • RRTime
  • TagID
  • TransmissionMfrCode
  • TransmissionNumSpeeds
  • TransType
  • FuelTypeName
  • TransmissionControlTypeName
  • YearID
Categories
Manufacturers
View all
Contacts
  • 1 (866) 456-4498 or (780) 456-4498
  • (780) 406-6622
  • +333 (Mobile) 012345
  • traction_theme
Information
Copyright © 2025 NAPC. All rights reserved.